PU200 Series                                     Data Sheet
200W Single to Quad Output
U-Bracket AC/DC Switchers

• EN 61000-3-2 Compliance
• UL, CSA & TUV Approved
• CE Marked
• Power Fail Detection (PFD)
• Overvoltage & Overcurrent Protections
• 100% Burn-In
• High Reliability
• Optional Cover-and-Fan Assembly

Input Voltage.............90-130 VAC or 180-264 VAC auto-ranging
Input Frequency...........47-63 Hz
Inrush Current............20A@115VAC, 40A@230VAC; @25°C cold start
Input-Output Isolation....3,000 VAC
Leakage Current...........0.4mA max. @115VAC/60Hz, 0.8mA max. @230VAC/50Hz
Ripple & Noise............2% peak to peak max.
Overcurrent Protection....Short circuit protectin on all outputs
Overvoltage Protection....112% to 132% on main output
Power Fail Detect Signal..TTL logic high for normal operation,
                          TTL logic low upon loss of input power
Operating Temperature.....0-70°C; 100% load up to 50°C
Derating..................Derated 2.5%/°C from 50°C to 70°C
Hold-up Time..............20 msec min. at nominal input
Switching Frequency.......75KHZ ± 5KHz
Efficiency................70% min. at full load
Line Regulation...........±0.5% max. at full load
Safety Approvals..........UL1950, CSA C22.2 No. 950, TUV EN60950/IEC950
EMI Standards.............FCC Class B, EN55011 (CISPR 11) Level B
MTBF......................>450,000 hours at full load
Input Connector...........3-pin screw terminal block
Output Connector..........13-pin screw terminal block
Weight....................3.1 lb for U-Bracket version
                          3.9 lb for enclosed version
Dimensions, W*L*H.........5*9*2.55 inches

Model No.	Output
	Vnom	Imin	Imax	*Ipk	*Pmax1	*Pmax2	Tol.
Single Output Models
PU200-10	5V	3A	40A	---	150W	200W	±2%
PU200-12	12V	1.2A	16.7A	---	150W	200W	±2%
PU200-13	15V	1A	13.4A	---	150W	200W	±2%
PU200-14	24V	0.6A	8.4A	---	150W	200W	±2%
PU200-16	30V	0.5A	6.7A	---	150W	200W	±2%
PU200-18	48V	0.3A	4.2A	---	150W	200W	±2%
Dual Output Models
PU200-23	+5V  +12V	3A  0A	30A  8A	---  12A	150W	200W	±2%  ±4%
PU200-24	+5V  +15V	3A  0A	30A  6A	---  9A	150W	200W	±2%  ±4%
PU200-25	+5V  +24V	3A  0A	30A  4A	---  6A	150W	200W	±2%  ±4%
Triple Output Models
PU200-30	+5V  +12V  -5V	3A  0A  0A	30A  8A  6A	---  12A  ---	150W	200W	±2%  ±4%  ±4%
PU200-31	+5V  +12V  -12V	3A  0A  0A	30A  8A  4A	---  12A  ---	150W	200W	±2%  ±4%  ±4%
PU200-32	+5V  +15V  -15V	3A  0A  0A	30A  6A  4A	---  9A  ---	150W	200W	±2%  ±4%  ±4%
PU200-33	+5V  +15V  -12V	3A  0A  0A	30A  6A  4A	---  9A  ---	150W	200W	±2%  ±4%  ±4%
Quad Output Models
PU200-40	+5V  +12V  -12V  *F5V	3A  0A  0A  0A	30A  8A  4A  6A	---  12A  ---  ---	150W	200W	±2%  ±4%  ±4%  ±4%
PU200-41	+5V  +15V  -15V  *F24V	3A  0A  0A  0A	30A  6A  4A  4A	---  9A  ---  ---	150W	200W	±2%  ±4%  ±4%  ±4%
PU200-42	+5V  +12V  -12V  *F12V	3A  0A  0A  0A	30A  8A  4A  4A	---  12A  ---  ---	150W	200W	±2%  ±4%  ±4%  ±4%
PU200-44	+5V  +12V  -15V  *F15V	3A  0A  0A  0A	30A  8A  4A  4A	---  12A  ---  ---	150W	200W	±2%  ±4%  ±4%  ±4%
PU200-45	+5V  +12V  -12V  *F24V	3A  0A  0A  0A	30A  8A  4A  4A	---  12A  ---  ---	150W	200W	±2%  ±4%  ±4%  ±4%
*Ipk is the peak output current with 10% max. duty cycle for less than 60 seconds.    Total peak power must not exceed 200 watts.  *Pmax1 is the maximum total output power at free air convection.  *Pmax2 is the maximum total output power at 25 CFM forced air.  *Output #4 on quad-ouput models is floating. It can be used as + or - output.
Note: Add suffix "B" for U-bracket or "C" for cover with fan.